Panasonic AK-HRP1005G Operating Instructions Manual page 26

5 [GAMMA] button
6 [FLARE] button
Use this button to display the gamma menus.
The menus will switch with each press of the button.
[GAMMA] [BLACK GAMMA]
"15 GAMMA" (see page 77)
"16 BLACK GAMMA" (see page 79)
"45 HDR-PAINT" (see page 122)
Status displays
Lit The current value matches that configured in the reference file.
green:
Lit The current value does not match that configured in the reference file.
red:
Off: Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
Values for the following menu items will not be compared with the reference file values
when [HLG MODE] or [SDR CNVRT MD] of [HDR-PAINT] is set to "FIX" in the reference
file.
Menu items when [HLG MODE] is set to "FIX":
HLG BLACK GAMMA R, HLG BLACK GAMMA B, HLG BLACK GAMMA MASTER
HLG B.GAMMA
HLG KNEE POINT, HLG KNEE SLOPE
HLG KNEE SW, HLG TYPE
Menu items when [SDR CNVRT MD] is set to "FIX":
SDR CONVERT GAIN, SDR CONVERT CLIP, SDR CONVERT POINT, SDR
CONVERT SLOPE
Use this button to display the flare menu.
"14 FLARE" (see page 76)
Status displays
Lit The current value matches that configured in the reference file.
green:
Lit The current value does not match that configured in the reference file.
red:
Off: Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
- 26 -
[HDR-PAINT] menu off (status screen)
Parts and their functions