3
[COLOR] button
4
[FILTER] button
Use this button to display the color menus.
The menus will switch with each press of the button.
[COLOR TEMP]
[UHD CHROMA]
CORRECTION]
[SKIN CORRECTION]
"10 COLOR TEMP" (see page 72)
"08 UHD CHROMA" (see page 70)
"07 HD CHROMA" (see page 69)
"25 LINEAR MATRIX" (see page 92)
"26 COLOR CORRECTION" (see page 94)
"27 SKIN CORRECTION" (see page 97)
Status displays
Lit
The current value matches that configured in the reference file.
green:
Lit
The current value does not match that configured in the reference file.
red:
Off:
Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
The [SAT] and [PHASE] values of [COLOR CORRECTION] are not compared with the ref-
erence file values.
Use this button to display the filter menu.
"04 FILTER" (see page 66)
Status displays
Lit
The current value matches that configured in the reference file.
green:
Lit
The current value does not match that configured in the reference file.
red:
Off:
Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
- 25 -
[HD CHROMA]
[LINEAR MATRIX]
menu off (status screen)
Parts and their functions
[COLOR