Hd Dtl/Skin Dtl (2/2); Sd Detail - Panasonic AKHRP200 Operating Instructions Manual

ROP.menu.setting.
(continued)
Item Display
+GAIN
-GAIN
HD.DTL/SKIN.DTL.(2/2)
→＊＊ ＨＤ ＤＴＬ／ＳＫＩＮ ＤＴＬ （ ２／２ ） ＊＊
ＳＫＩＮ ＤＥＴＡＩＬ ＳＷＩＴＣＨ
ＣＵＲＳＯＲ
ＳＫＩＮ ＧＥＴ
ＭＥＭＯＲＹ ＳＥＬＥＣＴ
ＣＲＩＳＰ
Ａ ０
Ｂ ０
ＺＥＢＲＡ ＳＷＩＴＣＨ
ＥＦＦＥＣＴ ＭＥＭＯＲＹ
Item Display
SKIN.DETAIL.
SWITCH
CURSOR
POS.H
POS.V
SKIN.GET
EXECUTE
CANCEL
MEMORY.
SELECT
MEM.A.CRISP
MEM.A.PHASE
20
Function
-31 Changes the detail gain level in
‫׀‬
+ (up) direction
0
‫׀‬
31
-31 Changes the detail gain level in -
‫׀‬ (down) direction
0
‫׀‬
31
ＯＦＦ
ＯＮ／ＯＦＦ Ｈ Ｖ
ＯＦＦ ９６０ ２７０
ＮＯ�
Ａ
ＰＨＡＳＥ ＷＩＤＴＨ ＳＡＴＵ
０ ０ ０
０ ０ ０
ＯＦＦ
Ａ＋Ｂ
( indicates factory default settings.)
Function
OFF Enables or disables control of
ON skin tone detail in HDTV video
output.
OFF Enables or disables the position
ON cursor that obtains the saturation
and color phase information for
controlling skin tone detail.
1 Sets horizontal cursor position.
‫׀‬
960
‫׀‬
1920
1 Sets vertical cursor position.
‫׀‬
270
.540
NO? Automatically obtains the
saturation and color phase
information from the cursor
position.
NO?:
Cancels operation.
EXECUTE:
Automatically obtains
saturation and color phase
information from the cursor
position.
CANCEL:
Discards the saturation and
color phase information
obtained from the cursor
position.
A Changes memory locations
B for saving the skin tone detail
settings (CRISP, PHASE,
WIDTH and SATURATION).
-63 Removes very faint noise
‫׀‬ components from detail
0 components in skin tone areas
‫׀‬ in memory bank A.
63
0 Changes the color phase of skin
‫׀‬ tone areas in memory bank A
359 in a range from 0 to 359 on a
vector display.
Item Display
MEM.A.WIDTH
MEM.A.SATU
MEM.B.CRISP
MEM.B.PHASE
MEM.B.WIDTH
MEM.B.SATU
ZEBRA.SWITCH
EFFECT.
MEMORY
SD.DETAIL
→＊＊ ＳＤ ＤＥＴＡＩＬ ＊＊
ＤＥＴＡＩＬ ＳＷＩＴＣＨ
Ｖ ＤＥＴＡＩＬ
Ｈ ＤＥＴＡＩＬ
ＣＲＩＳＰ
ＰＥＡＫ１
ＰＥＡＫ２
ＬＥＶＥＬ ＤＥＰＥＮＤＥＮＴ
ＤＡＲＫ ＤＥＴＡＩＬ
Item Display
DETAIL.SWITCH
V.DETAIL
H.DETAIL
CRISP
PEAK1 1.89M/2.18M/
2.56M/3.17M/
4.0M/5.28M/
6.75M
PEAK2 OFF/1.89M/
2.18M/2.56M/
3.17M/4.00M/
.5.28M/6.75M
Function
0 Expands the width of skin tone
‫׀‬
areas in memory bank A in a
255 range from 0 to 255.
0 Changes the saturation of skin
‫׀‬ tone areas in memory bank A in
255 a range of 0 to 255.
-63 Removes very faint noise
‫׀‬ components from detail
0 components in skin tone areas
‫׀‬ in memory bank B.
63
0 Changes the color phase of skin
‫׀‬ tone areas in memory bank B in
359 a range of 0 to 359 on a vector
display.
0 Expands the width of skin tone
‫׀‬ areas in memory bank B in a
255 range from 0 to 255.
0 Changes the saturation of skin
‫׀‬ tone areas in memory bank B in
255 a range from 0 to 255.
OFF Adds a zebra pattern to the
A Y signals of the PM output to
B
make areas subject to skin tone
A+B detail effects easily visible.
A Selects the memory bank to
B which skin tone detail effects will
A+B be added.
ＯＮ
３
５
０
３．１７Ｍ
ＯＦＦ
５％
１
( indicates factory default settings.)
Function
ON Enables or disables changes in
OFF contour enhancement (hard/soft)
level of SDTV video output.
0 Adjusts the amount of vertical
‫׀‬ detail.
3
‫׀‬
63
0 Adjusts the amount of horizontal
‫׀‬ detail.
5
‫׀‬
63
0 Sets the maximum amplitude of
‫׀‬ the very faint noise components
63 that are removed from detail
components.
Selects one of the two contour
correction frequency bands
(boost frequency or peak
frequency). Changes the contour
width.
Selects one of the two contour
correction frequency bands
(boost frequency or peak
frequency). Changes the contour
width.