Switch Pack Mode - SHOWTEC Single MKII User Manual

Switch Pack Mode

1. When the DMX address has been selected, press MENU button to enter the next item. And relevant
information will appear on the Segment Display.
2. Press UP or DOWN button to switch between "d---" and "s---" displays.
3. Press MENU button to enter the Switch Pack mode.
Switch Pack mode consists of Switch On (s-on) and Switch Off (s-off) patterns. In the "s-on" mode, output
is turned on and the fixture lights regardless of DMX signal. While in the "s-off" mode, the fixture will be
automatically controlled by the DMX signal. When DMX level is less than 40%, the fixture will go out. And
when the DMX level exceeds 40%, the fixture will light up.
4. Tap the UP or DOWN button to change between the Switch On (s-on) and Switch Off (s-off) modes.
www.liveline.be
www.liveline.be
6