Warranty; Technical Specifications; Troubleshooting - STEINEL XLED home 2 Information

9� Warranty
This STEINEL product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
Steinel guarantees that it is in perfect condition
and proper working order. The warranty period is
5 years and starts on the date of sale to the con-
sumer. We will remedy defects caused by material
flaws or manufacturing faults. The warranty will be
met by repair or replacement of defective parts at
our own discretion. The warranty shall not cover
damage to wear parts, damage or defects caused
by improper treatment or maintenance. Further
consequential damage to other objects shall be
excluded. Claims under the warranty will only be
accepted if the unit is sent fully assembled and
well-packed with a brief description of the fault, a
receipt or invoice (date of purchase and dealer's
stamp) to the appropriate Service Centre.
10� Technical specifications
XLED Home 2
Dimensions (H x W x D) 194 x 180 x 161
Output
14.8 W / 80 lm/W
Luminous flux / brightness 1184 lm
Weight 0.575 kg
Area illuminated Front view
Side view
Additional switching capacity max. 800 W (resistive load, e.g. light bulbs)
max. 400 W (uncorrected, inductive, cos ϕ = 0.5,
e.g. fluorescent lamps)
max. 400 W (electronic ballasts, capacitive, e.g. low-energy bulbs,
max. 4 each, ≤ 88 μF))
Efficiency 80 lm/W
Colour temperature 4000 K (neutral white)
Colour rendering index Ra ≥ 80
Supply voltage
230-240 ~V / 50/60 Hz
Sensor system Passive infrared
Reach max. 14 m
Angle of coverage 140°
Time setting 8 s - 35 min
Twilight setting
2 - 2000 lux
IP / protection class IP44 / II
Service:
Our Customer Service Department will repair faults
not covered by warranty or after the warranty pe-
riod. Please send the product well-packed to your
nearest Service Centre.
XLED Home 2 XL
212 x 180 x 161
20 W / 80 lm/W
1608 lm
0.620 kg
283.1 cm Front view 316.2 cm
2
113 cm Side view 115 cm
2
– 14 –
11� Troubleshooting
Malfunction
Sensor-switched LED floodlight
without power
Sensor-switched LED floodlight
will not switch ON
Sensor-switched LED floodlight
will not switch OFF
Sensor-switched LED floodlight
keeps switching ON and OFF
Sensor-switched LED floodlight
switches ON when it should not
2
2
Cause Remedy
n Fuse faulty, not switched ON, n Replace fuse, turn ON mains
break in wiring switch, check lead with voltage
tester
n Short circuit n Check connections
n Twilight setting in night mode n Readjust
during daytime operation
n Mains power switch OFF n Switch ON
n Fuse faulty n Fit new fuse, check connec-
tion if necessary
n Detection zone not properly n Readjust
targeted
n Continuous movement in the n Check zone and readjust if
detection zone necessary or apply shroud
n Animals moving in the detec- n Tilt sensor higher or apply
tion zone specific shrouds; adjust
detection zone or fit shrouds
n Wind is moving trees and n Change detection zone
bushes in the detection zone
n Cars on the road are being n Change detection zone
detected
n Sudden change in tempera- n Change detection zone,
ture caused by weather (wind, mount in a different place
rain, snow) or air discharged
from fans, open windows
n Sensor-switched LED flood- n Fit sensor-switched LED flood-
light swaying (moving), light to a firm surface
resulting, for example, from
gusts of wind or heavy
precipitation
– 15 –