Installation Guidelines - Elation CUEPIX 16IP DTW User Manual

I N S T A L L A T I O N I N S T R U C T I O N S
IP65 RATED
An IP rated lighting fixture is one, which is commonly installed in outdoor environments and has been
designed with an enclosure that effectively protects the ingress (entry) of external foreign objects such as
dust and water. The International Protections (IP) rating system is commonly expressed as "IP" (Ingress
Protection) followed by two numbers (i.e. IP65), where the numbers define the degree of protection. The
first digit (Foreign Bodies Protection) indicates the extent of protection against particles entering the
fixture, and the second digit (Water Protection) indicates the extent of protection against water entering
the fixture. An IP65 rated lighting fixture has been designed and tested to protect against the ingress of
dust (6) and high-pressure water jets from any direction (5).
MARINE/COASTAL ENVIRONMENT INSTALLATIONS
Please note that although this fixture is IP rated, the fixture is NOT suitable for marine and/or coastal
installations. Installing this fixture in a marine and/or coastal environment may cause corrosion and/or
excessive wear to the interior and/or exterior components of the fixture. Damages and/or performance
issues resulting from installation in a marine and/or coastal environment will void the manufacturer's
warranty and will NOT be subject to any warranty claims and/or repairs.
OPTIONAL CORROSION-RESISTANT COATING
Optional Corrosion-Resistant Coatings may be available for this fixture.
Please contact Elation Professional for more details.
DISCONNECT POWER BEFORE PERFORMING ANY MAINENANCE!
Keep fixture a minimum of 5.0 feet (1.5m) from flammable materials and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installations.
ENSURE ALL CONNECTIONS AND END CAPS ARE PROPERLY SEALED WITH A NON-
CONDUCTIVE DIELECTRIC GREASE (AVAILABLE AT MOST ELECTRICAL SUPPLIERS) TO
PREVENT WATER INGRESS/CONDENSATION AND/OR CORROSION.
USE CAUTION WHEN POWER LINKING OTHER MODEL FIXTURES AS THE POWER
CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAXIMUM POWER
OUTPUT OF THIS FIXTURE. CHECK SILK SCREEN FOR MAXIMUM AMPS.
10