Safety Guidelines - Elation CUEPIX 16IP DTW User Manual

SAFETY GUIDELINES

This device is a sophisticated piece of electronic equipment. To guarantee a smooth operation,
it is important to follow all instructions and guidelines in this manual. The manufacturer of this
device is not responsible for injury and/or damages resulting from the misuse of this device
due to the disregard of the information printed in this manual. Only qualified and/or certified
personnel should use this device. Any modifications to the device will void the original
manufactures warranty and increase the risk of damage and/or personal injury.
PROTECTION CLASS 1 – FIXTURE MUST BE PROPERLY GROUNDED.
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR
MANUFACTURERS WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS
TO THIS FIXTURE AND/OR THE DISRETGARD OF SAFETY INSTRUCTIONS AND
GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER'S WARRANTY AND
ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
DO NOT PLUG DEVICE INTO A DIMMER PACK!
NEVER OPEN THIS FIXTURE WHILE IN USE!
UNPLUG POWER BEFORE SERVICING FIXTURE!
NEVER TOUCH FIXTURE DURING OPERATION, AS IT MAY BE HOT!
KEEP FLAMMABLE MATERIALS AWAY FROM THE FIXTURE!
ENSURE ALL CONNECTIONS AND ENDCAPS ARE PROPERLY SEALED WITH
DIALECTRIC GREASE (AVAILABLE AT MOST ELECTRICAL SUPPLIERS) TO
PREVENT WATER CORROSION AND/OR ELECTRICAL SHORT CIRCUIT.
NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE!
RETINA INJURY RISK – MAY INDUCE BLINDNESS!
SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!
H I G H T E M P E R A T U R E W A R N I N G ! !
IF THE INTERNAL TEMPERATURE REACHES 212° F (100°C) AND/OR A
SIGNAL WIRE/SENSOR IN ONE OF THE 4-CELL LED SEQMENTS BECOMES
DAMAGED OR DISCONNECTED, THE FIXTURE OLED DISPLAY WILL FLASH
"TEMP ERROR" AND THE POWER CONSUMPTION TO ANY OF THE
AFFECTED LED SEQMENTS (1-4) WILL DROP TO 100W OR BE TURNED OFF.
6