Elation CUEPIX 16IP DTW User Manual page 12

I N S T A L L A T I O N I N S T R U C T I O N S
CLAMP MOUNTING
A 90-degree adjustable yoke bracket are attached to the fixture, both include 3-position holes for versatile
fixture positioning. Optional Omega Brackets are available, which can be attached to yoke brackets for
easy clamp-rigging. See the Optional Accessories at the end of this manual for the order code. When
mounting this fixture to truss or a metal structure, be sure to secure an appropriately rated clamp (not
included) to one of the yoke brackets using an M10 screw. Depending on rigging position of the fixture,
it may be best to use more than one clamp attached to the yoke.
WHEN USING THE 90-DEGREE ADJUSTABLE YOKE TO MOUNT THE FIXTURE, MAKE
SURE BOTH YOKE HANDLE KNOBS ARE SECURELY TIGHTENED CLOCKWISE.
SAFETY CABLE
The fixture includes 2 integrated safety cable rigging points. (See image below.)
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT DROP IF THE CLAMP FAILS.
YOKE
HANDLE KNOB
SAFETY C ABLE
RIGGING POINT
12
SAFETY C ABLE
RIGGING POINT
YOKE
HANDLE KNOB