Resetting The Filter Counter - Christie LX1000 Replacement Instruction Sheet

RESETTING THE FILTER COUNTER

Make sure the Filter counter is reset after the filter cartridge is replaced.
1. Press the MENU button to display the On-Screen Menu.
Use the Point
the Setting Menu icon.
2. Use the Point
Filter counter and then press the SELECT button. A dialog
box appears showing the Used time option and the Scrolls
remaining option. Use the Point
time.
3. Used time shows the total accumulated time of the filter use,
a timer setting option, and the Reset option. Select Reset
and the "Filter counter Reset?" appears. Select [Yes] to
continue.
4. In the confirmation dialog box, select [Yes] to reset the
Filter counter.
RESETTING THE SCROLL COUNTER
Make sure the Scroll counter is reset after the filter cartridge is replaced.
1. Press the MENU button to display the On-Screen Menu.
Use the Point
the Setting Menu icon.
2. Use the Point
Filter counter and then press the SELECT button. A dialog
box appears showing the Used time option and the Scrolls
remaining option. Use the Point
Scroll(s) remaining.
3. Scroll(s) remaining shows the number of the remaining
scrolls and the Reset option. Select Reset and the "Scroll
counter Reset?" appears. Select [Yes] to continue.
4. In the confirmation dialog box, select [Yes] to reset the
Scroll counter.
NOTE: While the scroll counter reset is in progress, a "Please
wait..." message appears on the screen, the cooling fans operate
and the filter cartridge is adjusted.
4 of 4
buttons to move the red frame pointer to
buttons to move the red frame pointer to
buttons to select Used
buttons to move the red frame pointer to
buttons to move the red frame pointer to
buttons to select
LX1000 Lamp/Filter Replacement Instruction Sheet
020-000168-01 Rev. 1 (02-2009)