Advertisement
1. Turn off the projector, and unplug the AC Line Cord
from the AC outlet.
2. First, clean up any dust on the projector and around the
air vents.
3. Slide and open the filter cover (see Figure 4).
4. Pull out the filter cartridge by holding the finger grip.
5. Insert a new Filter and close the filter cover. Make sure
that the filter cartridge is properly and fully inserted.
6. Connect the AC Line Cord to the projector and turn
ON the projector.
7. Reset the Filter counter and the Scroll Counter .
1) The projector will not turn ON if the filter cartridge is not
fully and properly inserted into the projector.
2) Do not put anything into the air intake vents. Doing so may
result in a malfunction of the projector.
RESETTING THE FILTER COUNTER
Be sure to reset the Filter counter replacing the filter.
1. Press the MENU button to display the On-Screen
Menu. Use the
pointer to the Setting Menu icon.
2. Use the
to Filter counter and then press the SELECT
button. A dialog box appears showing the Used
Time option you can scroll to view the remaining
Time options. Use the
time.
3. Used time shows the total accumulated time of the
filter use, a timer setting option, and the Reset
option. Select Reset and the "Filter counter
Reset?" appears. Select [Yes] to continue.
4. Another confirmation dialog box appears, select
[Yes] to reset the Filter counter.
LX900 Lamp/Filter Replacement Instruction Sheet
020-000029-01 Rev. 1 (01/08)
NOTICES
buttons to move the red frame
buttons to move the red frame pointer
buttons to select Used
Filter Cover
Filter Cartridge
Figure 4 Replace Filter
Select "Used time"
to display the
following dialogue box.
Select [Reset] to display the
"Filter counter Reset?"
dialogue box.
Select [Yes] to display the
final confirmation box.
Select [Yes] to reset
the Filter counter.
Figure 5 Reset Filter Counter
5 of 6
Advertisement
