Festo MS6-SFE-F5-AGD Series Operating Instructions Manual page 43

MS6−SFE−...
Symbols on the display
Symbols Description
Switching output A / switching output B
Security code active (blocked against unauthorised programming)
Activate accumulative consumption measurement or is active; Run
flashes when the measurement is started in the RECORDER mode.
Stop accumulated consumption measurement
Reset accumulated consumption measurement
Switching output set / not set
Threshold value comparator
Window comparator
Switching point
Lower switching point
Upper switching point
Pulse for accumulated consumption (consumption impulse)
Hysteresis
Normally open contact
Normally closed contact
Minimum flow (flow low)
Maximum flow (flow high)
Switching mode consumption (consumption only with Out A)
Switching mode flow (flow only with Out A)
Incorrect fitting, sieve cartridge or starting stretch missing
Festo MS6−SFE−... 0507NH English
43