Special Features Of Your Beocom 3; Connect And Use A Headset - Bang & Olufsen BeoCom 3 Manual

Special features of your BeoCom 3

BeoCom 3 is intended for use on public ISDN
networks. The phone supports a large number
of ISDN services, some of which require you to
take out special subscriptions with the phone
company.
The phone can only be expected to function in
the country for which it was manufactured, as
legal requirements and ISDN services may vary
from country to country. It will state on the
packaging which country your BeoCom 3 is
manufactured for. The national identity letters
can be found above the lowest barcode on the
label. If you are in any doubt about the use of
your BeoCom 3, please contact your retailer for
more information.
Bang & Olufsen hereby declare that BeoCom 3
is in accordance with the fundamental
requirements and other relevant regulations in
Directive 1999/5/EC.

Connect and use a headset

Headsets can be purchased as an accessory.
Connect the headset to the socket on the
side of your BeoCom 3.
Make a call using a headset...
0 – 9 Enter the phone number
Press to dial
Press to end your call
Contact your retailer for more information on
headsets.
Phone maintenance and cleaning
Clean your BeoCom 3 with a soft, damp
cloth with a few drops of mild detergent
added.
C
OK
7