Page 3
BeoCom 3 is an ISDN phone. With ISDN, you have two telephone lines coming into your home. This enables you to be on the phone while using the Internet, or handle two calls at the same time.
14 Enter a new name and number in the 6 Connect to an ISDN socket Phonebook 7 Special features of your BeoCom 3 15 Search in the Phonebook and make a 7 Connect and use a headset call...
Page 5
Set the ringer signal ISDN services and BeoCom 3 24 Set the volume, melody and ringer delay 34 Which ISDN Services does BeoCom 3 – select the ringer delay – the length of support…? time before BeoCom 3 rings 30 An example… several phones in the home What do I do if…...
The handset can connection must be secondary be turned round in the holder. phones. Setting BeoCom 3 as a main or The main phone works during a secondary phone power failure and can therefore The phone is pre-set to work as a main be used for emergency calls.
Special features of your BeoCom 3 Connect and use a headset BeoCom 3 is intended for use on public ISDN networks. The phone supports a large number Headsets can be purchased as an accessory. of ISDN services, some of which require you to...
Getting started with your BeoCom 3 In addition to working as a normal phone, your BeoCom 3 has many extra features. 19 February 09:20 To give you a quick overview of how to use BeoCom 3, the meaning and function of each key are presented here.
Indicator lights 19 February 09:20 The indicator lights above Lines 1 and 2 light The display shows the phone’s current status up when a line is in use, and flash to indicate for the selected line, and guides you through 1 new call when a call is on hold or to indicate status.
>> Getting started using BeoCom 3 The indicator lights The Extra key The indicator lights above the keys Line 1 and In many situations, you will have access to Line 2 are the phone’s news and status additional functions. This is indicated by a indicators.
Replace the handset in the cup message when you are unable to in order to end the call answer a call. BeoCom 3 shows a Press to end the call message in the display when new During a call, you can switch from the handset messages have been taken.
>> Daily use – make and answer calls Edit the number Adjust the volume Turn the microphone on or off If you enter the phone number before you During a call, you can adjust the volume in If you do not wish the person on the lift the handset, you can edit the number eight steps, where 1 is the lowest volume phone to overhear a conversation you are...
The built-in Phonebook The built-in Phonebook will Store a number after a call Enter a new name and number quickly become your handy reference when you want to call After a call, you will be asked if you want When you enter names and numbers, you family or friends.
Search all names in the Search by the first letter of a See the status of the Phonebook Phonebook name When the phone is not in use, you can When you search by the first letter of a You can quickly get an overview of the turn the wheel to search directly from the name in the Phonebook, you select a letter number of available entries in the...
>> The built-in Phonebook Edit a name or number Delete a name and number Copy a name and number You can edit a name or a number in the Use ‘Delete name/number’ in the You can copy a number and name in the Phonebook using ‘Edit name/number.’...
Phonebook and give before entering the extension number. the number a name. You can now call the BeoCom 3 automatically inserts a number from the Phonebook. pause after the main number, when the connection has been made.
Turn the wheel to select ’Store in Phonebook’ and Turn the wheel to select ‘Yes’ press OK NOTE! If BeoCom 3 becomes disconnected Press OK to delete the entire from the ISDN line, the Caller ID list will be list deleted.
Turn the wheel to select ‘Yes’ press OK Press OK to delete the entire list NOTE! If BeoCom 3 becomes disconnected from the ISDN list, the Redial list will be deleted. For information on storing calls from another phone in Redial, see page 26.
Hold. When one of the B channels is being used by another phone or modem, and you want to answer calls while having an active call on BeoCom 3, you need to subscribe to the Call Waiting service.
Line 1 and Line 2 simultaneously. on the principle ‘you pay for the calls that you make’. If your BeoCom 3 is connected to a switchboard, it may be necessary to change the setup menu in the phone in order to connect calls, see Call transfer page 29.
If a call has been transferred from another want to continue the call where it ISDN phone, you must use the Move phone, BeoCom 3 will ring using a special function. ringer signal. You must resume the call is quieter or if you want someone within 3 minutes.
NOTE! If Call diversion is altered from another Press OK to store the setting phone, the settings in BeoCom 3 will automatically be updated. Call diversion only works for calls to the Multiple Subscriber number for each line.
‘Systems with several Turn the wheel and select has passed. BeoCom 3 phones’, pages 31-32. ‘Volume’, ‘Melody’ or ‘Delay’ – press OK to choose If you disconnect the ringer signal, the phone...
If you have an ISDN subscription with several new call during a call. phone numbers and do not choose any number for the lines, BeoCom 3 will make the You can also: call from the main number. For incoming calls, –...
Extended Redial Turn flashing indicator lights off You can choose whether all calls should BeoCom 3 is pre-set to store calls from The indicator lights flash when a call from start at the same volume. The volume can other phones connected to the same ISDN...
Select language BeoCom 3 is set up to show the texts in the display in English. The ’Language’ menu shows you the other languages you can select. Language English ....Menu Press Menu to access the main menu Turn the wheel to find ‘Setup menu’...
These settings can be found in the number. Your BeoCom 3 is pre-set with the alter the display contrast. You can choose menu ‘Advanced’ and include: identification number 1. It may be between 5 steps.
Reading the version number in the phone display The dialling code is normally automatically Beocom 3 is preset to the most commonly If you need to give someone information added to incoming Caller ID calls with a used type of transferring external calls. If about the phone, perhaps because it is switchboard.
>> Advanced settings Clearing the settings and Phonebook If you choose to delete the contents of the Phonebook and clear all settings, you will not be able to find this information again later. Clear memory Clear all settings and the Phonebook Menu Press Menu to access the main menu...
2’ with the parents’ number to another. The BeoCom 3. You could also set the volume BeoCom 3 phones if the two ISDN volume can of course also be set to different differently.
Press OK to divert – manually divert a call, so that – when a call > On the second BeoCom 3 phone – lift the comes through – you can decide whether handset to receive the transferred call.
Overview of menus This chapter helps you to find Overview of options in the phone’s menu system your way around the menus shown in the display. Not all menus are shown in this See pages 14- Phonebook illustration. However, all main items of the 16 for Detailed information on the Store in Phonebook...
ISDN services and BeoCom 3 All the ISDN services supported by Which ISDN services can I use…? BeoCom 3 are normally activated in the exchange of your phone Caller ID (CLIR), see page 18 Voice Mail (MWI), see page 13...
How can I stop the indicator lights power supply to the NT box? flashing? If BeoCom 3 is set up as a main phone, it will Press Line 1 or 2 for the line that is flashing. work with reduced functions. This means that...
For your information… Your needs as a customer are given careful consideration in the design of a Bang & Olufsen product, and we constantly strive to make our products easy and comfortable to use. We therefore hope that you will take the time to tell us about your experiences with your Bang &...
Conditions of the guarantee Each Bang & Olufsen product purchased from an authorised Bang & Olufsen retailer carries a guarantee against defects in workmanship and materials. The guarantor is the Bang & Olufsen retailer or subsequently the national Bang & Olufsen representative.
Page 38
3507083 0108 Printed in Denmark by Bogtrykkergården a-s, Struer...
Need help?
Do you have a question about the BeoCom 3 and is the answer not in the manual?
Questions and answers