Two Calls At The Same Time; Switch Between Two Calls - Holding - Bang & Olufsen BeoCom 3 Manual

20
If you receive an incoming call
while you are already speaking on
the phone, you can choose to
place the first call on hold and
answer the new call. BeoCom 3
can handle two calls at the same
time – an active call and a call on
hold.
In order to receive a new call
during an active call, Call Waiting
must be connected, see page 25.
You can switch between the two
calls, or set up a conference
between both calls and yourself.
You can also connect the two
external calls without participating
in the call yourself.
NOTE! The functions under 'Two calls at the
same time' are linked to the ISDN service
Hold.
BeoCom 3 can however put calls on hold
without going via the exchange by using both
B channels. You therefore do not need to
subscribe to the service.
Contact your phone company for more
information on Hold.
When one of the B channels is being used by
another phone or modem, and you want to
answer calls while having an active call on
BeoCom 3, you need to subscribe to the Call
Waiting service.

Two calls at the same time

Switch between two calls
– Holding and Call Waiting
Switch between two calls by pressing
Line 1 or Line 2. The guide tabs in the
display and the indicator lights will
indicate which line is active and whether a
call is placed on hold on the other line.
19 February 12:38
Mary Lewis
96844630
Call duration: 3:00
Sheila Caine
96844401
19 February
Sheila Caine
96844401
Call duration: 0:30
19 February 12:40
Mary Lewis
96844630
Call duration: 6:01
You are making a call on line 1 and an
incoming call is registered on line 2...
> Press Line 2 to select line 2 and answer the
new call.
> Press Line 1 to return to the call on line 1.
If you receive a new call during an active call
Incoming call
and you want to end the active call, place the
handset in the cup and lift the handset again
to answer the new call.
12:39