Video Standby Mode; Start / End Recording - Kompernass CR 5 A2 Operating Instructions And Safety Instructions

Video standby mode

In video standby mode, the screen
A – displays the remaining recording time depending on resolution and
available storage space
B – current video resolution
C – symbol to indicate an inserted microSD card
D – battery charge level of the internal battery
E – date display (only when the "Time & date stamp" is activated)
F – time display (only when the "Time & date stamp" is activated)
G – symbol for motion detection (only visible if the function is activated)
H – symbol for a loop recording as well as its length in minutes (here 3 minutes)
I – display for exposure correction
J – symbol for video standby
K – red dot flashes during recording
L – symbol for a write-protected file

Start / end recording

Press the / ▲ button
down the button for fast zoom . You can use the
zoom out . Press the
recording the operating display
button again to stop the recording .
If you press the MODE button
the current recording will be write-protected .
NOTE
► As soon as the camera is connected to the vehicle's power supply, the recording
starts . To stop the recording, press the
■ 66 │ GB │ MT
shows the following overview:
repeatedly as required to zoom into the subject . Hold
/ button to start the video recording . During the video
blinks green (battery operation only) . Press the
during recording, the
/ ▼ button in the same way to
symbol is displayed and
/ button .
CR 5 A2