Operation - Kohler Englefield K-5627X Installation And Care Manual

Operation

Turn on the water supply.
¨
Switch on the electrical supply.
¨
Turn the temperature control knob to "MAX" position, the power indicator
¨
(red) will turn on, hot water will flow out within a few seconds. The more
temperature control knob being turned in clockwise direction, the hotter is
the shower.
The shower might not be hot enough even at the "MAX" position if
¨
incoming water supply from the mains is too cold or the pressure of water
is too high. In this case, you may adjust the stop valve to reduce the water
inflow in order to get the desired showering temperature.
The height and direction of shower holder are adjustable by releasing the
¨
shower holder knob clockwise and counter-clockwise (5627X).
Move the handshower to the desired angle. A ratchet mechanism in the
¨
shower holder will hold the handshower in selected position (72989X).
NOTICE: It is unnecessary to turn the temperature control knob to "OFF"
position when the heater is not in use.
Switch off the electricity supply after shower.
¨
Handshower Sprays
Kohler Co. 15 1237889-X2-G