Before You Begin - Kohler Englefield K-5627X Installation And Care Manual

Simplified Diagram (cont.)
Description of Control Panel
Power Indicator
ELCB Indicator
Temperature Control Knob
ELCB
TEST
RESET

Before You Begin

Observe all local plumbing, electrical and building codes.
¨
Prior to installation, unpack the new product and inspect it for damage.
¨
The walls and the floor must be square, plumb, and level.
¨
Fixture dimensions are nominal and conform to tolerances established by
¨
Standards TIS.
1237889-X2-G
When turning the temperature control knob
clockwise, the POWER indicator (red) will
light up.
The ELCB indicator (green) will light up
when the ELCB is in normal condition.
Increase water temperature by turning the
temperature control knob clockwise to "MAX"
position. Decrease water temperature and turn
off the heater by turning the temperature control
knob counterclockwise to "OFF" position.
TEST Press the "TEST" button to test ELCB.
Note: Test the ELCB regularly (at least once
a month).
RESET Press the "RESET" button to reset ELCB. After
pressing this button, the power and ELCB will
resume normal operation.
6 Kohler Co.