Operation - Kohler Mira Sport Thermostatic 9.0 kW User Manual

Read the section "IMPORTANT SAFETY INFORMATION" first.
1
Switch on the electrical
supply.
4
TEMPERATURE
Adjust temperature as
required.
7
Push START/STOP button.
Light in the button goes out
and shower continues to run
for a few seconds.
WARNING!
Turning the shower off and back on during showering may result in unstable
temperatures at the showerhead. Always ensure the temperature has stabilised before re-
using the shower.
Note!
A slight hissing sound may be heard from the shower during operation. High mains
water pressure and high shower temperatures will affect the tone. This is quite normal in use.

OPERATION

2
Push START/STOP
button. Light in the button
illuminates.
5
Allow 10 - 15 secs for any
temperature adjustments
to stabilise and reach the
showerhead.
8
Switch off the electrical
supply.
4
3
Turn power control to the
desired position.
6
0
15
Check water temperature
before entering shower.
9
A small amount of water
may continue to drain over
a few minutes.
ECO
LOW HIGH
POWER
H HOT
COLD