Maintenance - Kohler Englefield K-5627X Installation And Care Manual

Maintenance

Please carefully read the section "Safety Information" first.
Test the ELCB regularly (at least once a month). Turn on the electricity and
¨
water supply, both red (POWER) and green (ELCB) indicators will light up
when turning the temperature control knob clockwise. Press the ELCB Test
button, both POWER and ELCB indicators should go off. Press the reset
button to resume the electricity supply.
Clean the mesh filter regularly to prevent blockage. Closed stop valve and
¨
remove the built-in filter by turning its cap counterclockwise. Clean with
soft brush. Reinstall the built-in filter by inserting and then turning its cap
clockwise.
Open
Mesh Filter
If the Power indicator does not go off when you press the ELCB test button,
¨
immediately turn off the water supply, turn the unit off, and then switch off
the mains supply and contact Call Centre for repair service. Special skill is
required for repairing. Never try to repair the unit by yourself.
CAUTION: Risk of product damage. Do not use thinner, alcohol, petrol
or any other organic solutions to clean the unit. Use only damped cloth
with mild detergent.
1237889-X2-G
Internal Strainer
Close
Open
Mesh Filter
16
Flow Regulator
Close
Kohler Co.