Bringing Back Into Service After Maintenance - ACV Smart ME 200 Installation, Operation And Maintenance Instructions, For The User And The Installer

MAINTENANCE
DRAINING THE DHW TANK (Figure 4)
To drain the hot water heater's DHW tank:
1. Open fully the hot water tap (3) for at least 60 minutes to make sure the DHW tank has cooled
down sufficiently.
2. Close the filling valve (1) and the stop valve (4).
3. Connect the drain valve (2) to the sewer using a flexible hose.
4. Open the drain valve (2) and the air vent (5) to drain the water from the DHW tank to the
sewer.
5. Close the drain valve (2) and the air vent (5) after having drained the DHW tank.
Cold water
Hot water

BRINGING BACK INTO SERVICE AFTER MAINTENANCE

Refer to chapter "Starting up", page 35
1
2
Figure 4
Smart ME : A1003499 - 661Y2000 • C
EN
FR
NL
ES
3
4
IT
4
5
DE
PL
RU
en
41