ZOLL R Series Manual page 16

R S — N -I
ERIES ON NVASIVE
Task
Taking a single
measurement
Taking STAT
measurements
Taking automatic
measurements
Aborting
measurement in
progress
Changing NIBP
settings
Displaying the NIBP Menu
Unless it is an emergency situation where quick reaction is essential, you should always check
that the cuff inflation and alarm settings are set properly before taking a measurement. You can
display the NIBP menu without leaving MONITOR, DEFIB or PACER mode. BLS/Plus units
must be in Manual mode to display the NIBP menu.
To display the NIBP menu:
1. Press the Param softkey.
If the Param softkey label is not displayed, press the Return softkey until it is displayed.
The R Series unit displays the Parameter menu:
ECG
Press the NIBP softkey.
2.
The R Series unit displays the NIBP menu:
NIBP
Stat
12
B P (NIBP) O
LOOD RESSURE
Action
Press the NIBP button
( )
.
Press and hold the NIBP
( )
button for two seconds
(if the NIBP Button Press and
Hold configuration option is
set to NIBP STAT), or see the
next section, "Displaying the
NIBP Menu."
Press and hold the NIBP
( )
button for two seconds
(if the NIBP Button Press and
Hold configuration option is
set to NIBP AUTO), or see
the next section, "Displaying
the NIBP Menu."
Press the NIBP button.
See "Displaying the NIBP
Menu" on page 12.
NIBP
SPO2 CO2
NIBP NIBP
Settings
Auto PT. Type
www.zoll.com
I
PTION NSERT
Return
Return
Trend
9650-0914-01 Rev. C