Data Plate; How To Obtain Service Or Parts - Thermador PODM301 Use And Care Manual

Oven Problem
Fan is running during modes that do not
use convection
Warm air or steam escapes from oven
vent.
Cooling fan runs even when the oven is
turned off.

Data Plate

The data plate shows the model and serial number. Refer
to the data plate on the appliance when requesting service.
The data plate location is shown in the following picture.
Data Plate
Possible Causes and Suggested Solutions
On some models, the convection fan runs while the oven is preheating for
the bake mode. This is normal.
It is normal to see or feel steam or warm air escaping from the oven vent.
Do not block the vent.
This is normal. The cooling fan will continue to run, even after the oven has
been turned off, until the oven has cooled sufficiently.

How to Obtain Service or Parts

To reach a service representative, see the contact
information at the front of the manual. Please be prepared
with the information printed on your product data plate
when calling.
English 25