Data Plate; Warranty; Operation; Element Duty Cycles - Thermador Masterpiece ME271E Series Service Manual

Table 2 Thermador 30" Masterpiece Features by Model
1.3

Data Plate

The data plate reflecting model number and FD number is located on
the underside of the interface control panel, as shown in Figure 1.
Figure 1 Data plate
Data plate
Service Manual for Thermador Masterpiece Series Built-in Wall Ovens
The first 4 positions of the FD number reflect the year/month the
product was produced. FD numbers that begin with 87 were built in
2007; 88 = 2008; 89 = 2009, etc.
NOTICE
Be prepared to provide the complete model number and FD
number on the data tag of the unit when contacting Thermador
Customer Support or Technical Support for assistance.
1.4

Warranty

The product is warranted to be free from defects in materials and
workmanship for a period of 12 months from date of purchase.
Thermador will pay for all repair labor and replacement parts found to
be defective due to materials and workmanship. Service must be
provided by a Factory Authorized Service Agency, during normal
working hours.
Thermador assumes no responsibility for any repairs made on our
products by anyone other than authorized service technicians.
Find the complete product warranty statement in the Use and Care
Manual.
2

OPERATION

2.1

Element Duty Cycles

A new PID algorithm controls the way in which the elements cycle on
and off during each cooking mode duty cycle. Every minute, the oven
temperature is compared to the set point and a recalculation occurs,
Page 4 of 33