Advertisement
Model 8011 Connection Instructions
Alligator clips are connected the screw posts on the underside of the board, as shown here.
Contact information
If you have any questions after reviewing this information, please contact your local Keithley Instruments
representative or call Keithley Instruments corporate headquarters (toll-free inside the U.S. and Canada only) at
1-888-KEITHLEY (1-888-534-8453), or from outside the U.S. at +1-440-248-0400. For worldwide contact numbers,
visit the
Keithley Instruments website
Safety precautions
The 8011 High Current Test Socket Kit is designed to work exclusively with the 2651A High
Power System SourceMeter® Instrument and should never be connected to voltage sources
that may exceed 40 V DC. The socket should be used within a comprehensive test system (for
example, a protective enclosure or safety barrier) that provides adequate safety measures to
prevent hazards such as accessible voltage, fire and explosion from causing harm.
The following safety precautions should be observed before using this product and any associated instrumentation. Although
some instruments and accessories would normally be used with nonhazardous voltages, there are situations where hazardous
conditions may be present.
This product is intended for use by qualified personnel who recognize shock hazards and are familiar with the safety precautions
required to avoid possible injury. Read and follow all installation, operation, and maintenance information carefully before using
the product. Refer to the user documentation for complete product specifications.
If the product is used in a manner not specified, the protection provided by the product warranty may be impaired.
The types of product users are:
Responsible body is the individual or group responsible for the use and maintenance of equipment, for ensuring that the
equipment is operated within its specifications and operating limits, and for ensuring that operators are adequately trained.
Operators use the product for its intended function. They must be trained in electrical safety procedures and proper use of the
instrument. They must be protected from electric shock and contact with hazardous live circuits.
14
NOTE
(http://www.keithley.com).
WARNING
PA-1032 Rev. A / April 2011
Advertisement
