Raid Configuration; Raid Level - Thecus IP Storage Server N8800 User Manual

RAID Information
Item
Select
Master RAID
ID

RAID Level

Status
Disks Used
Total Capacity
Data Capacity
USB Capacity
iSCSI Capacity
RAID Config
Space Allocation

RAID Configuration

On the RAID List screen, press the RAID Config button to go to the RAID
Configuration screen. In addition to RAID disk information and status, this
screen lets you make RAID configuration settings.
For more information on RAID, see
RAID Level
You can set the storage volume as JBOD, RAID 0, RAID 1, RAID 5, RAID 6 or
RAID 10. RAID configuration is usually required only when you first set up the
device. A brief description of each RAID setting follows:
Description
Used to select the current RAID volume.
The RAID volume currently designated as the Master RAID
volume.
ID of the current RAID volume.
NOTE: All RAID IDs must be unique.
Shows the current RAID configuration.
Indicates status of the RAID. Can read either Healthy,
Degraded, or Damaged.
Hard disks used to form the current RAID volume.
Total capacity of the current RAID.
Indicates the used capacity and total capacity used by user
data.
Indicates the capacity allocated to USB target mode.
Indicates the capacity allocated to iSCSI.
Press this to configure RAID volumes.
Press this to adjust the space allocated for data, USB target
mode, and iSCSI.
Appendix C: RAID
30
Basics.