Entes EPM-4A Manual

AMMETER
EPM-4A / EPM-4C / EPM-4D / EPM-4P
EPM-4D (Ammeter with Demand) :
EPM-4A (Ammeter with Demand) :
EPM-4C (Ammeter with Setpoint) :
EPM-4P (Ammeter with Pick-Up) :
* Important Notice
Note :
Turn ( )
MEASUREMENT RANGES
Demand Time ( )
Setpoint (s p ):
s p
Latch Function ( ) :
Instant Tripping ( ) :
Start Time Delay ( ):
Automatic Start Mode ( ):
Selection of Current Transformer Primary Value (For EPM-4A, 4C, 4D and 4P)
UP or DOWN
UP or DOWN
Example:
Setting of Turn Number (For EPM-4A, 4C and 4P)
UP or DOWN
UP or DOWN
Setting of Demand Time (For EPM-4A, 4C, 4D and 4P)
UP or DOWN
UP or DOWN
Setting of High Setpoint Value (For EPM-4C and 4P)
UP or DOWN
UP or DOWN
Ctr
5000
trn
0001
0010
dE t
0015
0020
SP h
2500
2750
1
Setting of Low Setpoint Value (For EPM-4C and 4P)
UP or DOWN
UP or DOWN
Setting of Hysteresis Value (For EPM-4C and 4P)
UP or DOWN
UP or DOWN
Setting of On Time Value (For EPM-4C and 4P)
UP or DOWN
UP or DOWN
Setting of Off Time Value (For EPM-4C and 4P)
UP or DOWN
UP or DOWN
Setting of Start Time Value (For EPM-4C and 4P)
UP or DOWN
UP or DOWN
Setting of Auto Start Mode (For EPM-4C and 4P)
UP or DOWN
UP or DOWN
Setting of Instant Tripping Function (For EPM-4C and 4P)
UP or DOWN
UP or DOWN
SP L
2500
2250
hYS
5 . 0 0 0
6 . 0 0 0
on t
oF t
Strt
AUto
trP