Installation Instructions - Hans Grohe Unica'C Series Instructions For Use/Assembly Instructions

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may not be used as a holding handle. A
separate handle must be installed.
Shower hoses are only suitable for a connection
from the shower to the fitting. Never fit a shut-off
device between the fitting and the hose.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The plumbing codes applicable in the respective
countries must be oberserved.
• Thermostatic mixer: Operation / Assembly and
enclosed brochure
• Operation and function of hand shower, see enclosed
brochure.
• Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting
joints or tiles sticking out), that the structure of the wall
is suitable for the installation of the product and has
no weak points. The enclosed screws and dowels are
only suitable for concrete. For another wall construc-
tions the manufacturer's indications of the dowel
manufacturer have to be taken into account.
• Optimal functioning is only guaranteed with the com-
bination of Hansgrohe hand showers and Hansgrohe
shower hoses.
4
English
Symbol description
Assembly see page 32
Do not use silicone containing acetic acid!
Dimensions (see page 31)
Operation (see page 34)
Cleaning
and enclosed brochure
Spare parts (see page 35)
Special accessories (order as an
extra)
tile-matching-disk chrome plated
#97450000
Test certificate (see page 36)