Safety Notes; Installation Instructions; Symbol Description - Hans Grohe Bidette 1jet S 29230 Series Instructions For Use/Assembly Instructions

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Thermal disinfection:
• The product is exclusively designed for drinking
water!
• Not intrinsically safe against backflow
• Not suitable for operation in countries where
EN 1717 is valid
4
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 60°C
70°C / 4 min
Assembly (see page 33)
English

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 35)
Flow diagram (see page 35)
Spare parts (see page 37)
XXX = Colors
000 = Chrome Plated
670 = Matt Black
700 = Matt White
Maintenance (see page 36)
The check valves must be checked regularly according to
EN 806-5 in accordance with national or regional
regulations (at least once a year).
Cleaning (see page 38)
Operation (see page 38)