Switching The Time Switch Function On And Off Centrally - Siemens LOGO! 8 Manual

4 Operation
4.2

Switching the time switch function on and off centrally

The following options are available to centrally switch the output of the time switch
function on or off:

Button at the LOGO! inputs I1 and I2

Function keys F1 and F2 of the LOGO! TD

KNX button

Function keys F1 and F2 of the LOGO! TD via the integrated web server
KNX button
Press the A1 button of the KNX button, for example, to centrally switch on the
loader at the output Q1 of the LOGO! or the object linked to the KNX system.
Press the A2 button of the KNX button, for example, to centrally switch off the
loader at the output Q1 of the LOGO! or the object linked to the KNX system.
Web server
As an alternative to the function keys present in the hardware of the LOGO! TDE,
you can use the integrated LOGO! web server.
Table 4-3: Switching on and off via web server
No.
1.
2.
3.
Time Switch Function
Entry ID: 109745699, V1.0,
Enter the IP address of the LOGO into your default browser to open the web
server.
Note:
It is assumed that your PC or mobile device is connected to the LOGO! basic
device via a network (LAN, WLAN via router) and is located in the same subnet
as the LOGO!.
Log on with the web server password.
The default password is "LOGO".
1. In the menu, select the display for the LOGO! TD (text display).
2. To manually switch on the load, click the "F1" field. To manually switch off the
load, click the "F2" field.
04/2017
Action
31