Siemens LOGO! 8 Manual page 30

4 Operation
Web server
The following table shows, how to set a time in the message text via the web
server, using the example of standard time.
Table 4-2: Changing the switching times via the web server
No.
1.
2.
3.
4.
Time Switch Function
Entry ID: 109745699, V1.0,
Enter the IP address of the LOGO into your default browser to open the web
server.
Note
It is assumed that your PC or mobile device is connected to the LOGO! basic
device via a network (LAN or WLAN via router) and is located in the same subnet
as the LOGO!.
Log on with the web server password.
The default password is "LOGO".
1. In the web server menu, select the display for the LOGO! TD.
With the ▲ or ▼ arrow keys, select the message text of the standard time.
2.
3. Click the parameter you would like to change.
1. Enter a new value for the parameter.
Confirm with "OK".
2.
04/2017
Action
30