2 Setup and description
2.4.2
Connecting communication objects
In the "Group Objects" window, connect the LOGO! CMK communication channels
with the group addresses of the KNX devices (buttons, actuators, etc.).
Table 2-9: Communication objects
No.
1.
2.
3.
4.
Time Switch Function
Entry ID: 109745699,
V1.0,
Open the ETS window "Devices" and select the device "LOGO-KNX-Module-
CMK2000" together with the device with which the communication is to be
established.
To display the communication objects in the list view, select the "Group Objects"
tab from the lower tab of the list view.
1.
Open the context menu for an object of the LOGO-KNX-Module by
right-clicking it (in this application example "Channel 1").
Click on "Link with..." to connect the object with a group address.
2.
Specify the group address (in this application example "1/1/1" for the status LED
of the KNX button) of the communication object with which the object "Channel 1"
of the LOGO-KNX-Module will be connected with (e.g. "Group address of an
actuator").
04/2017
Action
20