Dell EMC Inspiron 3671 Service Manual page 65

Power Management
USB Wake Support
Wake on LAN/WLAN
Block Sleep
Table 11. System setup options—POST Behavior menu
POST Behavior
Numlock LED
Keyboard Errors
Fastboot
Extend BIOS POST Time
Full Screen Logo
Warnings and Errors
Table 12. System setup options—Virtualization Support menu
Virtualization Support
Virtualization
VT for Direct I/O
Enable the USB devices to wake the computer from Standby mode.
NOTE: This feature is only functional when the AC power adapter is
connected. If the AC power adapter is removed during Standby, the
system setup removes power from all the USB ports to conserve battery
power.
By default, Enable USB Wake Support is selected.
Enable or disable the feature that powers on the computer from the Off state when
triggered by a LAN signal.
• Disabled (default)
• LAN Only
• WLAN Only
• LAN or WLAN
• LAN with PXE Boot
When Block Sleep is enabled, the computer does not go to Sleep (S3) state.
By default, Block Sleep is not selected.
Enable or disable Numlock when the computer boots up.
By default, Enable Numlock LED is selected.
Set the computer to report keyboard-related errors when the computer boots up.
By default, Enable Keyboard Error Detection is selected.
Enable to set the speed of the boot process by bypassing some of the compatibility
steps.
• Minimal
• Thorough (default)
• Auto
Set the BIOS POST time for an additional pre-boot delay.
• 0 seconds (default)
• 5 seconds
• 10 seconds
Display the full screen logo if your image matches the screen resolution.
By default, Enable Full Screen Logo is not selected.
Enable or disable prompts on warning and errors.
• Prompt on Warnings and Errors (default)
• Continue on Warnings
• Continue on Warnings and Errors
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology.
By default, Enable Intel Virtualization Technology is selected.
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology for Direct I/O.
By default, Enable VT for Direct I/O is selected.
System setup 65