Dell EMC Inspiron 3671 Service Manual page 62

System Configuration
Miscellaneous Devices
Table 5. System setup options—Video menu
Video
Multi-Display
Primary Display
Table 6. System setup options—Security menu
Security
Admin Password
System Password
Internal HDD-0 Password
Internal HDD-0Password
Internal HDD-1 Password
Strong Password
Password Configuration
Password Bypass
Password Change
UEFI Capsule Firmware Updates
PTT Security
62 System setup
Enable or disable the Secure Digital (SD) card reader.
By default, Enable Secure Digital (SD) Card is selected.
This option enables or disables Multi-Display. It should be enabled for Windows 7 or
later. This feature is not applicable to other operating systems.
By default, Enable Multi-Display is selected.
This option determines which video controller becomes the primary display when
multiple controllers are available in the computer.
• Auto (default)
• Intel HD Graphics
• NVIDIA HD Graphics
Set, change, or delete the administrator password.
NOTE: You must set the admin password before you set the computer or
hard drive password. Deleting the admin password automatically deletes
the computer password and the hard drive password.
NOTE: Successful password changes take effect immediately.
Set, change, or delete the system password.
NOTE: Successful password changes take effect immediately.
Set, change, or delete the internal hard-disk drive password.
NOTE: Successful password changes take effect immediately.
Set, change, or delete the internal hard-disk drive password.
NOTE: Successful password changes take effect immediately.
Set, change, or delete the internal hard-disk drive password.
NOTE: Successful password changes take effect immediately.
Enable or disable permission to the computer and hard-drive passwords when the
admin password is set.
By default, Enable Strong Password is not selected.
Control the minimum and maximum number of characters allowed for the Admin and
System passwords.
Bypass the System (Boot) Password and the internal HDD password prompts during
a system restart.
• Disabled (default)
• Reboot Bypass
Enable or disable changes to the System and Hard Disk passwords when an
administrator password is set.
By default, Allow Non-Admin Password Changes is selected.
Enable or disable BIOS updates through UEFI capsule update packages.
By default, Enable UEFI Capsule Firmware Updates is selected.
Enable or disable Platform Trust Technology (PTT) visibility to the operating system.