Dell EMC Inspiron 3671 Service Manual page 61

System Configuration
SATA Operation
Drives
SMART Reporting
USB Configuration
Front USB Configuration
Rear USB Configuration
Audio
Dust Filter Maintenance
Allows you to configure the SATA drives on board. All drives are enabled by default.
The options are:
• Disabled
• AHCI
• RAID On (default)
Enable or disable various drives on board.
• SATA-0
• SATA-1
• SATA-2
• SATA-3
• M.2 PCIe SSD-0
By default, all the check boxes are selected.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology (SMART)
during system startup. This option is disabled by default.
Configures the integrated USB controller. If Boot Support is enabled, the computer is
allowed to boot any type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, the device attached to this port is enabled and available for
OS.
If USB port is disabled, the OS cannot detect any device attached to this port.
• Enable USB Boot Support
• Enable Front USB Ports
• Enable Rear USB Ports
By default, all the check boxes are selected.
NOTE: USB keyboard and mouse always work in the BIOS setup
irrespective of these settings.
Enable or disable the front USB ports.
• Front Port 1
• Front Port 2
By default, all the check boxes are selected.
Enable or disable the rear USB ports.
• Rear Port 1
• Rear Port 2
• Rear Port 3
• Rear Port 4
By default, all the check boxes are selected.
Enable or disable the integrated audio controller.
By default, Enable Audio is selected.
Enable or disable the BIOS reminder messages for maintaining the optional dust filter
installed in your computer, at the interval set.
• Disabled (default)
• 15 days
• 30 days
• 60 days
• 90 days
• 120 days
• 150 days
• 180 days
System setup 61