Weight-Only Operation; Scale Operation; Setting Personal Data; Measuring Weight/Body Fat - Smart Weigh Body Fat Scale Product Manual

This Smart Weigh Body Fat Scale will operate as a conventional weight-reading scale without any special
programming steps required�
Once the scale is initialized, position the scale on a hard flat surface as carpeted or uneven surfaces may
affect the accuracy�
Step onto the scale platform� After a few seconds, you will see the weight flashing to indicate a weight reading�
This scale features up to eight personal memory profiles that can be used to record gender, height, and age
for eight different users� This scale will provide body fat, water, muscle, and bone measurements�
To provide those measurements, you first need to set your gender, height, and age, followed by your
weight so the data will compute the measurement results and create a recognized user�
You do not need to set up a memory profile if you only desire a weight measurement�
Select a number 1 through 8 and use this number to enter your height, age, gender, and activity level;
the scale will then use this setting to calculate your results�
Adding personal information before the first use will eliminate the need to enter it again each time
you take a reading�
1. Press SET to turn the scale on�
2. Press
The gender/athlete mode blinks�
3. Press
icons� Press SET to confirm your gender / athlete selection� The height digits blink�
4.
Press
displayed height� The age digits blink�
5. Press
the displayed age�
When the scale shows 0�0, immediately step onto the scale for a measurement and remain standing�
Otherwise, the scale will turn off automatically� The scale will first display your weight and the data
will be saved� Next your body fat, water, muscle, and bone will show on the screen�
If there is no operation after five seconds and you have not completed the set-up, the scale will turn
to 0�0 and the process will have to be done again�
Use the above procedure to set any additional users�
1.
Press SET to turn the scale on�
2.
Press the
appear on the screen�
Product Manual
Weight - Only Operation

Scale Operation

Setting Personal Data

or button to select a desired memory number� Press the SET button to confirm�
or button to switch between the male, female, male athlete, and female athlete
or to increase or decrease the height value� Press the SET button to confirm the
or button to increase or decrease the age value� Press the SET button to confirm
Measuring Weight/ Body Fat
or button to select your personal memory number� Your personal data will
5