Battery Installation; Scale Operation; Tare Weighing - Smart Weigh Shipping and Postal Scale Manual

• Before using the scale for the first time, check the battery compartment and remove any
plastic insulation strips or packaging that may be in place to prevent battery drainage
during shipping and storage.
• One 9V block battery is included. This should be placed into the battery compartment in
the manner indicated on the base plate.
1. Remove any plastic insulation strips or packaging from the battery compartment.
2. Place scale on a flat, level surface.
3. Turn the scale on with the ON/OFF key. All segments are shown on the display.
4. Wait until the zero appear. Then place the object on the scale. The display will stabilize and
flash 3 times. Your current weight will now be displayed.
1. You can use the tare feature to subtract the weight of an empty box or container for
net weight determination. (The weight of the container will subtract from the available
capacity.)
2. Turn on the scale as described above.
3. Place the "tare item" on the platform.
4. Press TARE key and wait until "0.0" is displayed.
5. Add the "net-weight item" the display now will show the net- weight of the contents.
6. To return to normal weight display (gross weight), remove any items from the weighing
platform and press the TARE key again to re-zero the scale.
4

Battery Installation

Scale Operation

Tare Weighing

Product Manual