Video Configuration; Common - Planet Networking & Communication ICA-3260 User Manual

Warning!!! The downloading firmware procedure cannot be interrupted. If the power and/or
network connection are broken during the downloading procedure, it might possibly cause
serious damage to the device.
Please be aware that you should not turn off the power during updating the firmware and wait
for the "finish" message. Furthermore, do not try to upgrade new firmware if it's not
necessary.
System Restart

3.8 Video Configuration

This device provides 2 modes of video profile. The first one is 1080P WDR mode which
supports video resolution up to 1920x1080 with True WDR function. The second one is 1080P
60FPS mode which supports video resolution up to 1920x1080 at 60fps. User only can select
either WDR or 60FPS mode to operate the camera. Switching between WDR and 60fps mode,
the device will take time to re-configure system.

3.8.1 Common

7. The upgrade progress information will be displayed
on the screen.
8. A message will be shown while the firmware is
upgraded. Once the upgrading process is completed,
the device will reboot the system automatically.
9. Please wait for 80 seconds, and then you can use
PLANET IPWizard II to search the device again.
The device is restarted without changing any of the
settings.
48
60fps Full HD IR Bullet IP Camera
ICA-3260