Table of Contents
Advertisement
Video Orientation
Day & Night / Lux setting
Red / Blue gain
Denoise
3.7.2 Video Setting
Video System
TV Output
TV Output Focus Bar
Corridor Mode
Basic Mode：
Resolution
Flip or mirror the image as per your requirement.
The camera can detect the light level of environment.
Light Sensor Mode: If you choose "Light Sensor Mode", the
image will be turned to black and white at night in order to keep
clear. To set light sensor mode, appoint a lux standard of
switching D/N here. Current lux value is provided for reference.
Times Mode: Under "Times Mode" the switch time of Color /
Black and white is according to the given time.
Color Mode (Day): IR filter is always on. The video is colorful
even it is in dark conditions.
B/W Mode (Night): IR filter is always off. The video is black and
white even it is in bright conditions.
Set the values for Red / Blue gain. The available values are: -5,
-4, -3, -2, -1, 0, 1, 2, 3, 4, 5
This function is able to filter the noise and blur from the image
and show a clearer view. You can set the values for 2D and 3D
filters.
Click the drop down list to select the system type "NTSC/PAL".
Click the drop down list to select the system type
"NTSC/PAL/Auto/Off"
Show the Focus Bar on TV
The function allows you to get a vertically oriented video
stream from the camera. You can select "None/90 degrees/270
degrees".
There are 5 resolutions to choose from: 1920x1080,1280x720,
640x480, 320x240, or 176x144
51
Full HD Outdoor IR Wireless IP Camera
ICA-W3250V
Advertisement
Table of Contents
