Controlling Devices; Viewing Device Status - Huawei TP1102 Series Administrator's Manual

HUAWEI TP1102 Telepresence
Administrator Guide

2.5 Controlling Devices

Context
After setting the device parameters, use the Telepresence System Manager to control the
following devices:



Procedure
Step 1 From the menu bar, click Device Control to display the device topology.
Step 2 Control the devices as follows:



----End

2.6 Viewing Device Status

Context
From the device topology of the Telepresence System Manager, you can view the operating
status of all devices.
Procedure
Step 1 Click Device Control.
Step 2 View the status of devices.
Issue 01 (2013-07-15)
Microphone
Speaker
Power supply
Click Microphone to mute or unmute the microphone.
microphone is not muted;
Click Speaker to mute or unmute the speaker.
muted; indicates that the speaker is muted.
Click Power and choose Control. From the Power Control page, view the power status
of codec, camera and HD display, and click a power button to control the power supply
to the corresponding device.
− : powered off
− : powered on
− : The telepresence host detects that the device is disconnected from its power
supply.
If a device's name button is red or
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Using the Telepresence System Manager
indicates that the microphone is muted.
indicates that the speaker is not
appears, the device is not running properly.
indicates that the
14