Configuring The Browser; Using Http Or Https For Login - Huawei TP1102 Series Administrator's Manual

HUAWEI TP1102 Telepresence
Administrator Guide


2.1.2 Configuring the Browser

Prerequisites
Ensure that the latest patches for the computer operating system and the browser are installed.
Context
On the browser, turn off Pop-up Blocker, or add the website address of the Telepresence
System Manager to trusted sites.
Internet Explorer 8.0 and Firefox 3.5 are used as examples to describe how to configure
browsers. The method of configuring other versions of Internet Explorer and Firefox is
similar to that of configuring Internet Explorer 8.0 and Firefox 3.5.
Procedure
Step 1 Launch Internet Explorer.
Step 2 Choose Tools > Internet Options to display the Internet Options dialog box.
Step 3 Click the Security tab, choose Internet > Custom level to display the Security Settings
dialog box.
Step 4 Enable Active Scripting and all the parameters under Downloads.
Step 5 Click OK to return to the Internet Options dialog box.
Step 6 Click Trusted sites and then Sites to display the Trusted sites dialog box.
Step 7 In Add this website to the zone, enter the IP address or domain name of the Telepresence
System Manager.
Step 8 Click Add.
Step 9 Click OK to return to the Internet Options dialog box.
Step 10 Click OK.
----End

2.1.3 Using HTTP or HTTPS for Login

Context
The Telepresence System Manager supports Hypertext Transfer Protocol (HTTP) and
Hypertext Transfer Protocol Secure (HTTPS). HTTPS enhances the security of data
Issue 01 (2013-07-15)
Firefox 2.0 or later (Recommended Firefox 3.5)
If you do not perform Step 6
from the menu bar of Internet Explorer.
To configure Firefox, do the following:
From the menu bar of Firefox,, choose Tools > Options. From the General tab, enable Show the
Downloads window when downloading a file. From the Privacy tab, select Use custom settings for
history, select Accept cookies from sites, and click OK to save the settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Using the Telepresence System Manager
and Step 7, choose Tools > Pop-up Blocker > Turn Off Pop-up Blocker
6