Table of Contents
Troubleshooting
Subscribe to Our Youtube Channel
Related Manuals for LG SIGNATURE LGSBWAC92
Summary of Contents for LG SIGNATURE LGSBWAC92
- Page 1 Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. *MFL71182425* www.lg.com (1909-REV00) Copyright 2019 LG Electronics Inc. All Rights Reserved.
- Page 2 Warning! Safety • Do not place the TV and/or remote control in the following environments: Instructions - Keep the product away from direct sunlight. - An area with high humidity such as a CAUTION bathroom RISK OF ELECTRIC - Near any heat source such as stoves and SHOCK other devices that produce heat.
- Page 3 • Ventilation • Disconnecting the Device from the - Install your TV where there is proper Main Power - The power plug is the disconnecting ventilation. Do not install in a confined space such as a bookcase. device. In case of an emergency, the power - Do not install the product on a carpet or plug must remain readily accessible.
- Page 4 • Grounding (Except for devices which are • If any of the following occur, unplug not grounded.) the product immediately and contact - TV with a three-prong grounded AC plug your local customer service. - The product has been damaged. must be connected to a three-prong - If water or another substance enters the grounded AC outlet.
- Page 5 • Use only an authorized attachments / • Moving - When moving, make sure the product accessories approved by LG Electronics. Otherwise, this may result in fire, electric is turned off, unplugged, and all cables shock, malfunction, or product damage. have been removed.
- Page 6 Preparing • For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an • If the TV is turned on for the first time after extension cable that supports if the it was shipped from the factory, initialization USB cable or USB memory stick does not fit...
-
Page 7: Separate Purchase
Separate Purchase Lifting and moving the TV Separate purchase items can be changed or modified for quality improvement without any Please note the following advice to prevent the notification. Contact your dealer to buy these TV from being scratched or damaged and for items. - Page 8 • When transporting a large TV, there should • Avoid touching the screen at all times, be at least 2 people. as this may result in damage to the • When transporting the TV by hand, hold screen. • When supported cable is not long the TV as shown in the following illustration.
-
Page 9: Mounting To The Wall
Mounting to the Wall • Check the material of the wall and the thickness of the finishing. • Use the Wall mount anchor for wall material When you attach the TV to other building materials, please contact qualified personnel. of concrete, light concrete, strong natural stone, soft natural stone masonry brick and hallow block that do not crack. - Page 10 • When installing on a gypsum board or Tools you will need medium-density fiberboard (MDF) wall, • Phillips head + driver (manual or fasten the screws to the studs that support motorized), Ø 3/6/8 mm Drill bit, the wall. If there are no studs, check Level, Stud finder, Drill the distance from the inner wall before installing.
- Page 11 • When mounting a TV on the wall, 5 Align the wall mounting screw to the hole make sure not to install the TV and tighten it. Then, fasten the screws at by hanging the power and signal torque of 45 kgf/cm to 60 kgf/cm. cables on the back of the TV.
-
Page 12: Using The Kensington Security System
Using the kensington • When drilling holes into the wall, make sure you use a drill and drill security system bit with the specified diameter. (Only OLED65W9*) Ensure that you also follow the instructions regarding the depth of The Kensington security system connector is the holes. -
Page 13: Satellite Dish
HDMI • If the image quality is poor with an antenna connected, try to realign the antenna in the • When connecting the HDMI cable, the correct direction. product and external devices should be • An antenna cable and converter are not turned off and unplugged. -
Page 14: External Devices
External Devices • In PC mode, some resolution settings may not work properly depending on the Available external devices are: Blu-ray player, graphics card. HD receivers, DVD players, VCRs, audio systems, • If ULTRA HD content is played on your USB storage devices, PC, gaming devices, and PC, video or audio may become disrupted other external devices. -
Page 15: Basic Functions
Using Magic Remote Basic functions Control Power On (Press) Power Off (Press and hold) (Depending on model) Volume Control The descriptions in this manual are based on the buttons on the remote control. Please read Programmes Control this manual carefully and use the TV correctly. When the message [Magic Remote battery is 1 All running apps will close, and any recording low. - Page 16 To use the button, press and hold for more than 1 second. (POWER) Turns the TV on or off. You can turn your set-top box on or off by adding the set-top box to the universal remote control for your TV. Number buttons Enters numbers.
-
Page 17: Registering Magic Remote Control
Registering Magic Remote (up/down/left/right) Press the up, down, left or right button to scroll Control the menu. If you press buttons while the pointer is in use, the pointer will How to register the Magic disappear from the screen and Magic Remote Remote Control will operate like a general remote control. -
Page 18: Troubleshooting
Troubleshooting • It is recommended that an Access Point (AP) be located more than 0.2 m away from the TV. If the AP is installed Cannot control the TV with the remote control. closer than 0.2 m, the Magic remote • ... - Page 19 • A blue light blinks on the front of the Abnormal Display Companion Box (AV Box). • If the product feels cold to the touch, there - The TV may have a problem with the may be a small “flicker” when it is turned on. cooling fan or the temperature in the TV This is normal, there is nothing wrong with may be too high.
- Page 20 Generated Sound • “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. • Electrical circuit humming/panel buzzing: A low level noise is generated from a high- speed switching circuit, which supplies a large amount of current to operate a...
-
Page 21: Specifications
Specifications Broadcasting Specifications Analogue TV Digital TV (Depending on (Depending on country) country) PAL B/B, PAL B/G, DVB-T/T2 Television PAL D/K, PAL-I, DVB-C system SECAM B/G, DVB-S/S2 SECAM D/K, NTSC-M DVB-S/S2 DVB-C DVB-T/T2 VHF III : 174 ~ 230 UHF IV : 470 ~ 606 Program UHF V : 606 ~ 862 46 ~ 862 MHz... - Page 22 Wireless module(LGSBWAC92)Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range Output power(Max.) 2400 to 2483.5 MHz 18 dBm 5150 to 5725 MHz 18 dBm 5725 to 5850 MHz (Not for EU) 12 dBm Bluetooth Frequency range Output power(Max.) 2400 to 2483.5 MHz...
-
Page 23: Open Source Software Notice Information
Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. - Page 24 Important Examples of Images that may Cause Image Information for Retention Preventing Image • Still images or fixed images containing Retention certain information that are displayed uninterrupted on the screen, such as channel OLED is a self-emissive technology, which numbers, station logos, program titles, news brings many significant benefits to image or movie subtitles, and headlines.
- Page 25 Recommended Measures Information on Functions for Preventing Image Supporting Image Quality Retention in Relation to Temporary Image Retention • Avoid watching a video displaying an image as listed above for extended periods of time. • LG OLED TVs provide a feature called Pixel •...
-
Page 26: Network Settings
SMART TV Quick Setup Guide * Image shown may differ from your TV. * Image shown on a PC or mobile phone may vary depending on the OS(Operating System). * App icon positions may vary on the platform, depending on the software version. Network Settings 4 If the connection is successful, the "[Connected 1 Press the... -
Page 27: Troubleshooting Network Problems
Troubleshooting Network Problems 1 Press the (Settings) on the remote to Check the AP (Router) or consult your Internet access the settings menu. Point the ( ) [All service provider. Settings] icon and select by pressing the Wheel (OK) button on the remote. When X appears next to Gateway: Unplug the power cord of the AP (Router) and All Settings... -
Page 28: Updating The Tv Firmware
SmartShare Connection to Smartphone 1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network. 2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones). 3 Enable your smartphone to share content files with other devices.
Need help?
Do you have a question about the LGSBWAC92 and is the answer not in the manual?
Questions and answers