Page 1
Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. OLED65R1PUA OLED65R1PUE OLED65R1PUF www.lg.com *MFL71771432* Copyright 2021 LG Electronics Inc. All Rights Reserved. Printed in Korea (2110-REV02)
Page 2
Important Safety Instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •...
Page 3
Title Warning! Safety Instructions Connections Preparing Troubleshooting - Lifting and moving the TV Specifications - Installation - Antenna/Cable - Open Source Software Notice Information - Licenses Starting TV Precautions for Protecting the OLED TV - Turning on the TV - Registering Magic Remote Control Screen...
Page 4
Warning! Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Page 5
• Disconnecting the Device from the Main Power • If any of the following occur, unplug the product - The power plug is the disconnecting device. In case of an immediately and contact your local customer service. - The product has been damaged. emergency, the power plug must remain readily accessible.
Page 6
• Batteries - Store the accessories (battery, etc.) in a safe location out of the reach of children. - Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat. - Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
Preparing Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. • Before moving the product, turn off the TV using the remote control or the power button on the back of the product, and ensure the panel is lowered into the set and the top door is closed properly.
Installation Install the product at least 10 cm (3.93 inches) away from the ceiling and the walls to the left and right and with at least 7 cm (2.75 inches) between the stand and the wall at the back. • It is recommended to install the product on the floor. •...
Starting TV Turning on the TV You can simply operate the TV functions, using the button. <Zero View> <Full View> <Line View> Using button Power On (Press) Power Off (Press and hold) Volume Control 1) All running apps will close. Channels Control •...
Page 10
Adjusting the menu When the TV is turned on, press the button one time. You can adjust the Menu items using the button. Turns the power off. Accesses the settings menu. Clears on-screen displays and returns to TV viewing. Changes the input source. •...
Registering Magic Remote Control How to register the Magic Remote Control To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.
Using Remote Control Using Magic Remote Control (Depending upon model) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor. Microphone Power Turns the TV on or off.
Page 13
Microphone Back Returns to the previous level. Wheel (OK) Press the center of Back Clears on-screen displays and button to select a menu. You can returns to last input viewing. change channels by using button. Q. Settings Accesses the Quick - Do not move the wheel on the Settings.
Page 14
Connections You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device. HDMI • When connecting the HDMI cable, the product and external devices should be turned off and unplugged. •...
Page 15
IR Blaster Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player, soundbar, game consoles, etc., using the IR Blaster. • Connect the IR Blaster cable to the TV’s IR Blaster port. Note • Place both ends (one or two) of the IR Blaster in front of the external device as shown in the picture below. •...
Troubleshooting • Check if anything such as tape has been placed over the receiver. Cannot control the TV with the remote • Check if there is any obstacle between the product and the remote control. control. • Replace the batteries with new fresh ones. No image display and •...
Page 17
Cleaning and Care • Be careful as the lubricant used in the gear part may smear the cleaning tool.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). •...
Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit https://opensource. lge.com . In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
Page 20
Precautions for Protecting the OLED TV Screen Unlike regular LED/LCDs, OLED TVs produce images that emit light for each pixel, achieving a perfect black color and delivering clear images without blurring. Due to the nature of the organic materials used to achieve high-resolution image quality, OLED displays generally experience image retention on the screen, which can be a persistent phenomenon.
Page 21
Recommendations for Minimising Image Retention → [Picture] → [Select Mode] and set the mode When watching the TV for a long time, press the button on the remote control, go to to [APS], go to [Advanced Settings] → [Brightness] and set [OLED Pixel Brightness] to a lower level. In addition, press the button on the →...
Page 24
NOTE TO CABLE/TV INSTALLER (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Page 28
Supplier`s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com The model and serial number of the product are located LG Customer Information Center on the back and on one side of the product. Record For inquires or comments, visit www.lg.com or call;...
Need help?
Do you have a question about the OLED65R1PUA and is the answer not in the manual?
Questions and answers