Ricoh CH-C1 Technical Bulletin page 97

Hide thumbs Also See for CH-C1:

Table of Contents

Reissued:27-Mar-14

.: RD135038a

CH-C1 Finisher SR4110

Installation Procedure

Turn the machine off and disconnect the machine power cord before you do this

1. Unplug the machine power cord before starting the following procedure.

2. Unpack the finisher and remove all tapes and shipping retainers.

3. Open the front door and remove the shipping retainers.

4. Remove the brackets, tags, and wires in this order: [A]> [B]> [C] ( x 2 each).

5. Be sure to remove the two sheets of paper [D].

Troubleshooting