PAGE: 3/12 Reissued: 01-April-15 Model: Date: No.: RICOH Scan CX v1 30-Oct-13 RD769001c Read This First Read This First Trademarks Trademarks ® ® ® Microsoft , W indows , and MS-DOS are registered trademarks of Microsoft Corporation in the United States and /or other countries.
PAGE: 4/12 Reissued: 01-April-15 Model: Date: No.: RICOH Scan CX v1 30-Oct-13 RD769001c Installation and Initial Configuration Installation and Initial Configuration Installation and Initial Configuration Flow It is necessary for a customer engineer to perform this process. It is possible for a user to perform this process.
PAGE: 5/12 Reissued: 01-April-15 Model: Date: No.: RICOH Scan CX v1 30-Oct-13 RD769001c Installation and Initial Configuration VM Card Installation If the JavaVM is installed to the device’s Flash Memory (FM), this procedure is not necessary. In this case, please proceed to the “JavaVM Configuration”...
RD769001c Installation and Initial Configuration RICOH Scan CX Embedded v1 Installation & Activation Use Remote Install Manager to install & activate RICOH Scan CX Embedded V1. Please see the Service Manual of Remote Install Manager. Important: The product key used on “3. Installation/ Activation → 4. [Install Software] Enter product key”, in the Remote Install Manager service manual is as follows:...
PAGE: 7/12 Reissued: 01-April-15 Model: Date: No.: RICOH Scan CX v1 30-Oct-13 RD769001c Installation and Initial Configuration Activation Check 1. Turn on the device’s main power. 2. Press the [User Tools/Counter] button, and then press [Extended Feature Settings].
Page 8
PAGE: 8/12 Reissued: 01-April-15 Model: Date: No.: RICOH Scan CX v1 30-Oct-13 RD769001c Installation and Initial Configuration 5. When viewing the [Startup Setting] tab, confirm that the application is “Startin g Up”.
RICOH Scan CX v1 30-Oct-13 RD769001c Installation and Initial Configuration Function Priority Setting This setting is optional. Please ask the customer if it is required. 1. Press the [User Tools/Counter] button, and then press [System Settings]. 2. Please select RICOH Scan CX.
RD769001c Appendix Appendix VM Card Update 1. Access the RICOH Scan CX Embedded management tool to write down the settings. 2. Download Error Job using Job Management function from the maintenance of RICOH Scan CX Embedded management tool. 3. Uninstall RICOH Scan CX Embedded from the device using Remote Install Manager.