Ricoh CH-C1 Technical Bulletin page 21

Model:
Model CH-C1
3. Open the top cover.
4. Rub the surface of the M0774287 polishing tool (WEB:POLISH:FUSING:ASS'Y)
against the surface of the fusing belt.
Important:
 F After you finish each section of the fusing belt surface, rotate the fusing gear [A]
counterclockwise and do the next section. Repeat this until you have polished the
entire surface of the belt.
 Make sure to polish both the front and rear sides of the fusing belt. This is
because scratches are generated by the front and rear edges of paper.
T B
echnical ulletin
Date:
19-Jun-13
PAGE: 3/6
No
.: RD135026