Setting Seg2, Seg3 Option; Setting Cool Mode; Setting Seg4, Seg5 Option; Setting Dry Mode - Samsung MCM-D201N Installation Manual

Setting an address and installation option of AHU KIT

1. Setting SEG2, SEG3 option

Press Low Fan button( ) to enter SEG2 value.
Press High Fan button( ) to enter SEG3 value.
Each time you press the button,

2. Setting Cool mode

Press button to be changed to Cool mode in the ON status.

3. Setting SEG4, SEG5 option

Press Low Fan button( ) to enter SEG4 value.
Press High Fan button( ) to enter SEG5 value.
Each time you press the button,

4. Setting Dry mode

Press button to be changed to DRY mode in the ON status.
5. Setting SEG6, SEG8 option
Press Low Fan button( ) to enter SEG6 value.
Press High Fan button( ) to enter SEG8 value.
Each time you press the button,
6. Setting Fan mode
Press button to be changed to FAN mode in the ON status.
7. Setting SEG9, SEG10 option
Press Low Fan button( ) to enter SEG9 value.
Press High Fan button( ) to enter SEG10 value.
Each time you press the button,
8. Setting Heat mode
Press button to be changed to HEAT mode in the ON status.
9. Setting SEG11, SEG12 option
Press Low Fan button( ) to enter SEG11 value.
Press High Fan button( ) to enter SEG12 value.
Each time you press the button,
10. Setting Auto mode
Press button to be changed to AUTO mode in the OFF status.
11. Setting SEG14, SEG15 option
Press Low Fan button( ) to enter SEG14 value.
Press High Fan button( ) to enter SEG15 value.
Each time you press the button,
20
Option setting
... will be selected in rotation.
... will be selected in rotation.
... will be selected in rotation.
... will be selected in rotation.
... will be selected in rotation.
... will be selected in rotation.
Status
SEG2
SEG3
SEG4 SEG5
SEG6
SEG8
SEG9
SEG10
SEG11
SEG12
SEG14
SEG15