Samsung MCM-D201N Installation Manual page 17

Example of IN/OUT sensor installation 1
1. Chcek the sensor and sensor holder you will attach.
Type
NOTE
IN sensor(Blue)
OUT sensor(Red)
2. Attach the sensor holder to the selected location of a pipe.
Attaching a sensor
• Attach the sensor at the place where temperature
NOTE
detection is easily available. (Refer to p.16)
• Attach the sensor holder as closely as possible on the
surface of the pipe.
• Check whether the sensor you will attach is IN or OUT
sensor. (The size of IN/OUT sensor is different.)
3. Insert the sensor and the clip into the sensor holder.
4. Bend the clip to fix it.
5. Attach the insulator around the attached sensor.
Diameter of a Diameter of a sensor
sensor (mm) holder (mm)
ø 6 ø 6.8
ø 7 ø 7.8
Clip for sensor fixing
Insulator
Pipe
Clip for sensor fixing
Sensor holder
IN/OUT sensor
Sensor holder
IN/OUT sensor
Insulator
17