Example Of In/Out Sensor Installation 2 - Samsung MCM-D201N Installation Manual

Installing an AHU KIT

Example of IN/OUT sensor installation 2

1. Chcek the sensor and sensor holder you will attach.
Type
NOTE
IN sensor(Blue)
OUT sensor(Red)
2. Attach the sensor closely to the pipe.
Attaching a sensor
• Attach the sensor at the place where temperature
NOTE
detection is easily available. (Refer to p.16)
• Attach the sensor as closely as possible on the surface of
the pipe.
• Do not use a sensor holder.
3. After attaching the sensor on the pipe, cover it with aluminum
tape.
4. Cover the sensor with rubber tape.
5. Fix the sensor with cable ties.
6. Attach the insulator around the attached sensor.
18
Diameter of a Diameter of a sensor
sensor (mm) holder (mm)
ø 6 ø 6.8
ø 7 ø 7.8
Insulator
Aluminum tape
Pipe
Aluminum tape
Rubber tape
Cable tie
Insulator
IN/OUT
sensor
Cable tie
Rubber tape
Sensor
IN/OUT sensor
IN/OUT sensor