Table of Contents
Advertisement
Setting the Display option
Display lighting can be adjusted by following this instruction.
Using the Smart A/C application
You can conveniently control your air conditioner anywhere with Smart APP.
WIFI(WPS) is not seen to new remote control LCD.( It is hidden function .)
Remote controller display
AR7000 CV HP_IB&IM_DB68-05637A-00_EN.indd 26
1. Press the Settings button.
2. Press the
,
or Settings button until (Display) indicator starts to blink.
3. Press the SET button to set the display status.
- 3 seconds after setting Display function, (Display) indicator on the remote
controller display will disappear and indoor unit display will be turned off.
Press the Settings button
make (Display) indicator blink and press the SET button.
Cancel
(Display) indicator on the remote controller display will disappear and
the indoor unit display will be turned on again.
Display option cannot be set when the air conditioner is off.
Operation or timer display will not be turned off by the display off function.
1. Press the Timer button to set the WiFi function.
- Press the Timer button for 4 seconds.
- (
) will blink first, then(
few seconds and disappears. WiFi function will begin.
2. Press the Settings button to set the WPS function.
- Press the Settings button for 4 seconds.
- (
) will blink first, then disappears and WPS function will begin.
English-26
Press the
,
or Settings button to
) appears on the remote controller display for
2015/10/12 15:43:07
Advertisement
Table of Contents
