Philips FC8820 Manual page 12

ENGLISH
12
Charging directly from the mains
1 Insert the small plug of the adapter into the socket on the robot (1).
Insert the adapter into a wall socket (2).
2 Press the power switch to switch on the robot.
3 When the robot is connected to the mains correctly, the light in
the on/off button of the robot starts flashing. This indicates that the
rechargeable battery is being charged.
4 When the rechargeable battery is fully charged, the light in the
on/off button of the robot stops flashing.
Preparing the room for a cleaning run
- Before you start the robot on its cleaning run, make sure that you
remove all loose and fragile objects from the floor.
Using your robot
Starting and stopping
1 Press the on/off button. The light in the on/off button goes on and
the robot starts cleaning.
- You can press the on/off button on the robot.
- You can also press the on off button on the remote control or on
the pointer (FC8820).